Welcome to Dak FPV!
New Version with 1800uf cap on board
BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with ...
The latest Electronic Speed Controller (ESC) from Spedix the GS35 4in1 (2-4S).
This board is four (4) 35A ESCs on one board. This is great for centralizing your mini-quad's weight (getting the ESCs off the arms), reducing weight and simplifying your build. Great for smaller quads where space on your arms is limited and weight is a premium.
Aikon AK32 35A 4S
The Aikon AK32 35A 4S is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware.
What makes the AK32 different?
New BLHeli_32 code base
Programmable PWM frequency of up to 48KHz
Auto-timing for higher efficiency and reliability
Adjustable “Brake on Stop” force
30A 4-in-1 F30A esc
- Continue Current: 30A, Burst Current: 35A
- Input Voltage: 2-6S Lipo
- BEC Output: 5V/3A, 12V/1A(only apply to 4S, 5S, 6S, 12V/1A)
- Size: 43*40*8mm
- Weight: 12.95g
- Firmware: BLHeli_S
- Support Dshot150/300/600, Oneshot125/42, Multishot, PWM
- Main IC: EMF8BB21F16G SILABS, 8bit C8051, run 50MHz
DYS F20A 20amp 4 in 1 BLHeli_S ESC 2-4S BB2 BEC 5V/12V 3A Supports Dshot600 Oneshot125 Oneshot42 Multishot
Item name: F20A ESC
Continue current: 20A, Burst Current: 25A up to 10S
Input voltage: 2-4s Lipo
BEC output: 5V/12 3A
Type: BLHeli_S Firmware
Weight: 21g(include cable and connector)